Table of Contents
Advertisement
Graupner mz-32 / mz-16 Help Reference Manual
F17S1
by tapping on the channel number field which will highlight the channel.
Tap on the Action icon to activate the sequence for channel.
To start a programmed sequence, it is required to assign a switch (Input Control) by tapping
on the Control field which will display the Select Input Control dialog.
Tap on the plus sign to add a point on the time line.
Tap on the minus sign to remove the active highlighted point.
You can move between points by tapping on the dot (color will change) on the timeline or
by tapping on left/right arrow icons to move the vertical red cursor.
Tap on the right double arrow (chevron) icon, which will provide different options in the
bottom line.
Tap on the time value to activate the field for change. Use the left/right arrow keys to move
the currently active dot along the timeline axis.
Tap on the percent value to activate the field for change. Use the up/down arrow keys to
increase/decrease the currently active output value for the data point.
F18S1
MIX ONLY CHANNEL
The Mix Only channel menu allows you to designate a
virtual channel that is used only for controlling a mix,
without losing the channel for output.
For example, if you assign a switch (Input Control) to
channel 8, as the master for enabling a mixer input.
Setting channel 8 as Mix Only will only use the switch
(Input Control) assigned to channel 8 without sending
an output signal to CH8. Therefore channel 8 is
available for other functions.
CHANNEL SEQUENCER
The Channel Sequencer can control up to 3 channel
outputs for functions such as opening and closing
multiple gear doors. Control landing operation and
even sequencing SLS power drives in sailplanes.
The uses for the channel sequencer are only limited by
your imagination.
Each channel can have its own switch (Input Control)
assigned for added flexibility or you can use the same
switch (Input Control) to initiate the programmed
sequence for all 3 channels.
Each channel has its own color. A channel is selected
Page 35 of 51
Help-Ref-EN-V2.7
Advertisement
Table of Contents
