Disassembly And Replacement - Toshiba e-STUDIO 200L Service Manual

13.5 Disassembly and Replacement

[A] Fuser unit
(1) Take off the right rear cover
( P.2-37 "[N] Right rear cover").
(2) Disconnect 2 connectors, remove 2 screws,
and then take off the fuser unit.
Notes:
1. Be careful when handling the fuser unit as
it may become very hot.
2. Be careful not to hold the center part
(shaded part in the figure at right).
June 2004 © TOSHIBA TEC
Fuser unit
Fig.13-7
Fig.13-8
e-STUDIO200L/202L/230/232/280/282 FUSER UNIT
13 - 11
Connector
Connector
13