Toshiba e-STUDIO 200L Service Manual page 333

[J] Lower transport roller
(1) Take off the ADU cover
( P.15-12 "[E] ADU cover").
(2) Remove 2 screws and take off the exit guide.
(3) Remove 2 clips, 2 pulleys and 2 pins on the
front side. Then take off the timing belt.
(4) Remove 1 clip on the rear side. Take off 2
bushings and lower transport roller.
June 2004 © TOSHIBA TEC
Bushing
e-STUDIO200L/202L/230/232/280/282 AUTOMATIC DUPLEXING UNIT (ADU) (OPTION: MD-0102)
15 - 17
Exit guide
Fig.15-30
Pin
Pin
Pulley
Timing belt
Fig.15-31
Bushing
Lower transport roller
Fig.15-32
Clip
Clip
15