Toshiba e-STUDIO 200L Service Manual page 204

(6) Remove 3 screws with spring. Then take off
the laser optical unit.
[B] Laser control signal relay PC board (LRL board)
(1) Take off the plate
( P.8-9 "[A] Laser optical unit").
(2) Disconnect 3 connectors from the LRL
board. Remove 1 screw and release 2 lock-
ing supports, then take off the LRL board.
e-STUDIO200L/202L/230/232/280/282 LASER OPTICAL UNIT
Laser optical unit
Plate
8 - 10
05/07
Fig.8-13
Fig.8-14
LRL board
Fig.8-15
June 2004 © TOSHIBA TEC