Toshiba e-STUDIO 200L Service Manual page 231

(4) Loosen 1 setscrew and take off the drawer
feed clutch.
Note:
Attach the clutch to the shaft referring to the
figure at right.
[S] Registration roller clutch
(1) Take off the main motor drive unit
( P.10-5 "[B] Main motor drive unit").
(2) Loosen 2 setscrews. Disconnect 1 connector
and take off the registration roller clutch.
June 2004 © TOSHIBA TEC
Setscrew
Fig.9-42
0.2-0.5mm
Fig.9-43
Connector
Setscrew
Registration roller clutch
Fig.9-44
e-STUDIO200L/202L/230/232/280/282 PAPER FEEDING SYSTEM
9 - 25
Drawer feed clutch
9