Toshiba e-STUDIO 200L Service Manual page 240

(18) Slide the registration roller (metal) to the rear
side. Then remove the gear.
(19) Pull out the registration roller (metal) to the
front side.
[X] Registration sensor
(1) Take off the registration rollers (rubber one
and metal one)
( P.9-31 "[W] Registration roller").
(2) Disconnect 1 connector and remove 3
screws and take off the registration guide L.
e-STUDIO200L/202L/230/232/280/282 PAPER FEEDING SYSTEM
Registration roller ( metal )
9 - 34
Gear
Registration roller
( metal )
Fig.9-68
Fig.9-69
Registration guide L
Fig.9-70
June 2004 © TOSHIBA TEC