(7)
Disconnect 1 connector. Release the latches
and take off the 2nd transport sensor.
(8)
Disconnect 1 connector. Remove 2 screws
and take off the bypass pickup solenoid and
solenoid arm.
[K] Drawer feeding unit
(1)
Take off the drawer.
(2)
Remove 1 screw and take off the drawer
feeding unit by sliding it to the front side.
e-STUDIO200L/202L/230/232/280/282 PAPER FEEDING SYSTEM
Solenoid arm
Drawer feeding unit
9 - 20
2nd transport sensor
Fig.9-28
Bypass pickup solenoid
Fig.9-29
Fig.9-30
June 2004 © TOSHIBA TEC