Output Channel - Toshiba e-STUDIO 200L Service Manual

16.3 Output Channel

The followings are five output channels which are not linked with the door switch.
1) +3.3V
+3.3VA : CN705
Output to the SYS board
+3.3VB : CN705
Output to the SYS board
+3.3VB : CN706
Output to the LGC board
+3.3VB : CN708
Output to the SLG board
2) +5.1V
+5.1VA : CN705
Output to the SYS board
+5.1VB : CN705
Output to the SYS board
+5.1VB : CN706
Output to the FUS board
+5.1VB : CN706
Output to the LGC board, PFP/ LCF (via LGC board),
Bridge unit / Job separator / Offset tray (via LGC board)
+5.1VB : CN707
Output to the finisher
+5.1VB : CN708
Output to the SLG board
+5.1VB : CN708
Output to the RADF
3) +12V
+12VA : CN705
Output to the SYS board
+12VB : CN705
Output to the SYS board
+12VB : CN706
Output to the LGC board
+12VB : CN708
Output to the SLG board
4) -12V
-12VA : CN705
Output to the SYS board
-12VB : CN705
Output to the SYS board
5) +24V
+24VB : Not used
June 2004 © TOSHIBA TEC
Pins 13, 14, 15 and 16
Pins 19 and 20
Pin 30
Pins 9 and 10
Pins 24 and 26
Pin 25
Pin 26
Pins 27 and 28
Pin 4
Pins 3 and 4
Pins 5 and 6
Pin 7
Pin 5
Pin 22
Pin 13
Pin 9
Pin 3
16 - 3
e-STUDIO200L/202L/230/232/280/282 POWER SUPPLY UNIT
16