(5)
Turn the hinge pin to point at the front side
and pull it out downward. Open the ADU and
take it off by sliding it to the rear side.
[B] ADU inside rear cover
(1)
Take off the ADU
(
P.15-10 "[A] Automatic Duplexing Unit
(ADU)").
(2)
Remove 2 screws and take off the ADU
inside rear cover.
[C] ADU opening/closing switch
(1)
Take off the ADU inside rear cover
(
P.15-11 "[B] ADU inside rear cover").
(2)
Disconnect 1 connector. Release the latches
and take off the ADU opening/closing switch.
June 2004 © TOSHIBA TEC
e-STUDIO200L/202L/230/232/280/282 AUTOMATIC DUPLEXING UNIT (ADU) (OPTION: MD-0102)
15 - 11
ADU
Fig.15-12
ADU inside rear cover
Fig.15-13
ADU opening/closing switch
Fig.15-14
Pin
15