Toshiba e-STUDIO 200L Service Manual page 183

[L] Carriage home position sensor
(1) Take off the rear cover upper rear cover
( P.2-31 "[C] Rear cover",
Upper rear cover").
(2) Disconnect 1 connector from the carriage
home position sensor on the left rear position
of the equipment upper side.
(3) Release the latches of the sensor and take
off the carriage home position sensor.
[M] Scan motor
(1) Take off the rear cover upper rear cover
( P.2-31 "[C] Rear cover",
Upper rear cover").
(2) Disconnect the connector of scan motor.
(3) Remove 3 screws and take off the scan
motor.
Note:
When installing, use a stepped screw to fix
the left rear point.
June 2004 © TOSHIBA TEC
P.2-34 "[I]
P.2-34 "[I]
6 - 27
Carriage home position sensor
Fig. 6-45
Fig. 6-46
Scan motor
Fig. 6-47
e-STUDIO200L/202L/230/232/280/282 SCANNER
6