Toshiba e-STUDIO 200L Service Manual page 261

(3) Release the harness from the harness clamp
and pull out the discharge LED.
[D] Main charger
(1) Take off the discharge LED unit
( P.11-10 "[C] Discharge LED").
(2) Pull out the main charger and take it off by
sliding it to the rear side.
Note:
Be careful not to touch or scratch the drum
surface at this time.
[E] Main charger grid
(1) Take off the main charger
( P.11-11 "[D] Main charger").
(2) Remove the spring and take off the main
charger grid.
Note:
Do not touch the mesh area of the grid.
June 2004 © TOSHIBA TEC
Fig.11-12
Fig.11-13
Main charger grid
Fig.11-14
e-STUDIO200L/202L/230/232/280/282 DRUM RELATED SECTION
11 - 11
Discharge LED
Main charger
Spring
11