Toshiba e-STUDIO 200L Service Manual page 249

(8) Remove 3 screws. Take off the main motor
drive unit front bracket while removing the
timing belt, gear, pin and bushing.
(9) Take off the gear and timing belt from the
main motor drive unit rear bracket.
Note:
When assembling the main motor drive unit,
assemble it while the fixing screw is loos-
ened. Then hook the tension spring and
tighten the fixing screw of the tensioner.
June 2004 © TOSHIBA TEC
Screw
Bushing
Fig.10-8
Gear
Gear
Fig.10-9
Tension spring
1
Fig.10-10
e-STUDIO200L/202L/230/232/280/282 DRIVE SYSTEM
10 - 7
Drive unit front bracket
Screw
Pin
Pulley
Bushing
Timing belt
2
Fixing screw
10