E-Studio202L/232/232S/282/282S - Toshiba e-STUDIO 200L Service Manual

1.3.2

e-STUDIO202L/232/232S/282/282S

Platen Cover
Reversing Automatic Document Feeder (RADF)
Automatic Duplexing Unit (ADU)
Drawer module
Slot cover
Paper Feed Pedestal (PFP)
Large Capacity Feeder (LCF)
Finisher (Hanging type)
Finisher (Console saddle stitcher type)
Hole punch unit (for MJ-1025)
Staple cartridge
Bridge kit
Job separator
Offset tray
Work tray
Damp heater
Fax board
2nd line for fax board
Printer kit
Printer/Scanner kit
Scanner kit
Scrambler board
Wireless LAN module
Bluetooth module
Antenna
Data overwrite kit
PCI slot
Desk
Harness kit for coin controller
* 1) N: North America E: Europe F: France S: Sweden
Notes:
1. The bridge kit (KN-3520) is necessary for installation of the finisher (MJ-1022 or MJ-1025).
2. The saddle stitch finisher (MJ-1025) is necessary for installation of the hole punch unit
(MJ-6005N/E/F/S).
3. The PCI slot (GO-1060) is necessary for installation of the scrambler board (GP-1040).
4. The antenna (GN-3010) is necessary to enable the wireless LAN module (GN-1041) and
Bluetooth module (GN-2010).
5. When the wireless LAN module (GN-1041) and the Bluetooth module (GN-2010) are
installed, only 1 antenna (GN-3010) can be connected to each.
6. GM-1080U / GM-2080U / GM-4080U are exclusive to e-STUDIO202L. They do not operate
with e-STUDIO232/232S/282/282S.
e-STUDIO200L/202L/230/232/280/282 SPECIFICATIONS / ACCESSORIES / OPTIONS / SUPPLIES
KA-3511PC/-C
MR-3020
MD-0102
MY-1021/-C
KE-2330
KD-1011/-C
KD-1012LT/A4/A4-C
MJ-1022/-C
MJ-1025
*1
MJ-6005N/E/F/S
STAPLE-1600 (for MJ-1022)
STAPLE-2000 (for MJ-1025)
KN-3520/-C
MJ-5004/-C
MJ-5005/-C
KK-3511/-C
MF-3520U/E
GD-1150NA/EU/AU/AS/C/TW
GD-1160NA/EU-N/C/TW
GM-1070/GM-1080U
GM-2070/GM-2080U
GM-4070/GM-4080U
GP-1040
GN-1041
GN-2010
GN-3010
GP-1060
GO-1060
MH-1700
GQ-1020
1 - 8
05/11
June 2004 © TOSHIBA TEC