Toshiba e-STUDIO 200L Service Manual page 284

(6) Remove 1 screw and plate spring.
(7) Remove 1 screw and take off the polarity
adjustment lever.
Note:
Make a note of the position where the polar-
ity adjustment lever is pointing. (Mark the
position if needed.) When reassembling,
match the polarity adjustment lever with the
previously marked position on the scale.
(8) Remove 2 screws and take off the bracket.
(9) Remove 1 E-ring and take off the guide roller
on the front side.
e-STUDIO200L/202L/230/232/280/282 DEVELOPMENT SYSTEM
Connector
E-ring
12 - 14
Plate spring
Polarity adjustment lever
Fig.12-20
Bracket
Fig.12-21
Guide roller
Fig.12-22
June 2004 © TOSHIBA TEC