Hangar 9 T-34 Mentor 40 ARF Assembly Manual page 45

 
. .Step 11
Temporarily.install.the.aileron.servo.and.mark.the.
locations.for.the.servos.screws.using.a.felt-tipped.pen.
 
. .Step 12
Remove.the.servos.and.drill.holes.for.the.servo.mounting.
screws.using.a.1/16".(1.5mm).drill.bit.
Section 14: Radio Installation
 
. .Step 13
Connect.a.9".Servo.Extension.(JRPA097).to.the.servo.
lead..Secure.the.connectors.by.tying.them.in.a.knot.
using.dental.floss.(as.shown).or.by.using.a.commercially.
available.connector.clamp.to.prevent.the.servo.leads.from.
becoming.disconnected.
 
. .Step 14
Use.a.piece.of.string.with.a.small.weight.(such.as.a.wheel.
collar).attached.as.a.device.to.pull.the.servo.lead.through.
the.wing..Lower.the.weight.through.the.servo.opening,.
allowing.it.to.pass.through.the.ribs.and.out.of.the.hole.in.
the.center.of.the.wing.
45