Hangar 9 T-34 Mentor 40 ARF Assembly Manual page 24

Section 7: Fixed Gear Installation
 
. .Step 13
Drill.the.locations.marked.in.the.previous.step.using.a.
3/32".(2.5mm).drill.bit..Work.slowly.as.to.avoid.drilling.
through.the.top.of.the.wing.
 
. .Step 14
Attach.the.main.gear.mount.using.four.3mm.x.12mm.
sheet.metal.screws.
24
 
. .Step 15
Insert.the.main.gear.wire.into.the.mount..Adjust.the.height.
of.the.wire.to.3".(76mm).as.shown.
Note:.It.may.be.necessary.to.lightly.
sand.the.main.gear.wire.so.it.can.be.
inserted.into.the.main.gear.mount.
 
. .Step 16
Rotate.the.main.gear.wire.parallel.to.the.centerline.of.
the.wing..The.goal.is.to.have.both.main.wheels.pointing.
straight.forward.when.installed.
Hint:.You.can.also.use.the.mounting.
screws.as.a.reference.