Hangar 9 T-34 Mentor 40 ARF Assembly Manual page 41


.Step 4
Depending.on.your.motor.selection,.you'll.need.to.have.
the.motor.output.shaft.protruding.through.the.non-rotating.
end.of.the.motor..Follow.the.instructions.included.with.
your.motor.if.necessary.to.relocate.the.output.shaft.

.Step 5
Mount.the.motor.to.the.motor.mount.front.using.hardware.
included.with.the.motor.
Section 13: Electric Motor Installation

.Step 6
Attach.the.motor.mount.front.to.the.motor.mount.sides.
using.four.8-32.x.1/2".socket.head.screws,.four.#8.
washers.and.four.8-32.lock.nuts..With.the.propeller.
adapter.installed,.position.the.motor.mount.so.the.face.of.
5
the.adapter.is.4 / ".(118mm).from.the.firewall.
.
8

.Step 7
Build.a.wiring.harness.for.the.batteries.using.a.female.
connector.and.two.male.connectors..Follow.the.wiring.in.
the.photo.so.the.motor.sees.the.voltage.increase.of.the.
two.batteries.
41