Hangar 9 T-34 Mentor 40 ARF Assembly Manual page 22

Section 7: Fixed Gear Installation

.Step 4
Drill.the.locations.marked.in.the.previous.step.using.a.
3/32".(2.5mm).drill.bit.

.Step 5
Attach.the.nose.gear.mount.using.four.3mm.x.12mm.
sheet.metal.screws.

.Step 7
Slide.the.steering.arm.onto.the.nose.gear.wire,.but.do.not.
tighten.the.screw..Slide.the.nose.gear.wire.into.the.nose.
gear.mount.
22
Note:.It.may.be.necessary.to.lightly.
sand.the.nose.gear.wire.so.it.can.move.
freely.in.the.nose.gear.mount.

.Step 8
Slide.the.4mm.brass.wheel.collar.onto.the.nose.gear.wire..
Temporarily.secure.the.collar.to.the.nose.gear.wire.using.
a.3mm..setscrew..Adjust.the.position.of.the.wheel.collar.
until.the.nose.gear.is.positioned.5
nose.gear.mount.as.shown.
1
/ ".(134mm).from.the.
.
4