Hangar 9 T-34 Mentor 40 ARF Assembly Manual page 34

Section 9: Retract Linkage Installation

.Step 13
Slide.the.pushrod.through.the.holes.in.the.firewall.and.
former.2..Connect.the.clevis.to.the.retract.actuating.lever.

.Step 14
Apply.a.bead.of.thick.CA.to.the.corners.of.the.fuselage.
retract.servo.tray.
34

.Step 15
Position.the.servo.tray.so.the.edge.is.in.alignment.with.
the.center.opening.of.the.servo.tray..Use.6-minute.epoxy.
to.glue.the.tray.into.position.

.Step 16
Install.a.retract.servo.in.the.servo.tray.using.the.hardware.
provided.with.the.servo..Prevent.splitting.the.servo.tray.
by.drilling.1/16".(1.5mm).holes.for.the.servo.mounting.
screws.