Section.10:.Engine.installation - Hangar 9 T-34 Mentor 40 ARF Assembly Manual

Section 10: Engine Installation
Required Parts
•.Engine.mount.(2).
•.6-32.x.1".machine.screw.(4)
•.#6.x.5/8".sheet.metal.screw.(4)
Required Tools and Adhesives
•.Drill
•.Drill.bit:.3/32".(2.5mm).,.7/32".5.5mm)
•.Clamps.

.Step 1
Position.the.engine.on.the.engine.mounts..Measure.the.
distance.from.the.work.surface.to.the.drive.washer..Adjust.
the.mounts.so.the.distance.is.4
to.hold.the.mounts.to.the.engine.

.Step 2
Use.a.square.to.make.sure.the.engine.is.perpendicular.to.
the.work.surface.
36
•.6-32.blind.nut.(4)
•.Felt-tipped.pen
5
/ ".(118mm)..Use.clamps.
.
8

.Step 3
Use.a.3/32".(2.5mm).drill.bit.to.mark.the.locations.for.the.
engine.mounting.bolts.

.Step 4
Remove.the.engine.and.drill.the.locations.marked.in.the.
previous.step.using.a.3/32".(2.5mm).drill.bit.
Note:.Use.a.drill.press.for.the.best.
results..This.makes.holes.perfectly.
perpendicular.(square).to.the.mount.