Hangar 9 T-34 Mentor 40 ARF Assembly Manual page 44

Section 14: Radio Installation

.Step 5
Mount.the.radio.switch.to.the.side.of.the.fuselage.

.Step 6
Wrap.the.receiver.and.receiver.battery.in.protective.
foam.to.prevent.damage.that.may.be.caused.by.engine.
vibration.

.Step 7
Connect.any.necessary.extensions.and.Y-harnesses.
necessary.to.connect.the.retract.and.aileron.servos..
Connect.the.elevator,.rudder.and.throttle.servo.leads..
to.the.receiver.
44

.Step 8
Temporarily.mount.the.receiver.and.battery.into.the.
fuselage..It.may.be.necessary.to.relocate.the.battery.
forward.or.aft.to.balance.the.model.as.described.in.the.
section."Control.Throws.and.Center.of.Gravity."

.Step 9
Route.the.antenna.through.the.bottom.of.the.fuselage.and.
secure.it.to.a.location.at.the.tail.with.rubber.bands.