Hangar 9 T-34 Mentor 40 ARF Assembly Manual page 42

Section 13: Electric Motor Installation

.Step 8
Solder.the.appropriate.connectors.onto.the.speed.control.

.Step 9
Remove.the.covering.from.both.sides.of.the.fuselage..
as.shown.to.allow.for.cooling.air.across.the.motor..
and.batteries.
42

.Step 10
Create.a.battery.tray.or.other.method.for.securing.the.
batteries.inside.the.fuselage..Make.sure.that.if.you.are.
installing.retracts,.the.batteries.won't.interfere.with.the.
retract.servo.and.linkage.

Step 11
Attach.the.speed.control.inside.the.fuselage.where.it.will.
have.sufficient.air.flow..Plug.the.motor.into.the.speed.
control..Plug.the.speed.control.into.the.receiver..Mount.
the.speed.control.inside.the.fuselage.so.it.will.not.interfere.
with.the.installation.and.removal.of.the.batteries.

.Step 12
Turn.on.the.radio.system..Plug.the.wiring.harness.
assembled.in.Step.4.into.the.batteries.and.speed.control..
Use.the.throttle.on.the.transmitter.to.check.that.everything.
is.working.correctly..Check.that.the.motor.is.rotating.
counterclockwise..If.not,.follow.the.directions.included.
with.the.speed.control.to.correct.the.situation.

.Step 13
Once.the.motor.is.working.and.rotating.in.the.correct.
direction,.unplug.the.wiring.harness.for.safety.