Touch Screen Display - Yaesu FT3DR Operating Manual

Touch Screen Display

Lights when Auto Power Off is active
Lights when AF DUAL Function is enabled
Lights when the mute unction is active
Battery condition
Displays mode
A-band display area
A-band icon
B-band display area
B-band icon
Status Bar
The battery condition is displayed in 8 steps.
: Full battery power
: Battery is depleted. Charge battery.
: (When blinking) Charge battery immediately.
Appears when the lock function is enabled.
Appears when the Mute function is enabled.
Appears when the AF DUAL function is enabled.
Appears when the APO (Automatic Power-Off) function is enabled.
Appears when the DTMF Autodialer function is activated.
Appears when the Built-in GPS function is activated.
Appears when the Voice memory function is enabled.
Appears when the GPS Log function is enabled.
Appears when a microSD card is inserted.
Appears when the Bluetooth function is activated.
6
LOCK
Lights when DTMF function is enabled
Lights when GPS is acquired
Lights when GPS Log Function is enabled
Lights when a microSD memory card is inserted
Lights when Bluetooth function is active
Communication mode selection (AMS/DN/VW)
Communication mode selection at AMS (AMS/DN/VW)
Press: Function menu screen
Press and hold: Memory write
Display of settings such as DG-ID/TONE
Communication Mode
Squelch/Volume Bar Graph (B-band)
Displays operation mode
Squelch/Volume Bar Graph (B-band)