Transmitting the Registered DTMF Code
1. Press the Function key, then press the [9] key to toggle
between the "AUTO" and "MANUAL". Select the "AUTO".
Display
AUTO
MANUAL
2. While pressing the PTT switch, press a numeric [1] to [9] key to DTMF memory num-
ber registered in "Setting the DTMF Memory".
• The DTMF code registered in the DTMF memory channel is automatically trans-
mitted.
• Even after releasing the PTT switch, the transmission continues until the
DTMF code is completed. The transceiver is automatically returned to receive
mode.
Manually Transmitting the DTMF Code
1. Set "MANUAL" reffering to the above "Transmitting
the Registered DTMF Code".
2. While pressing and holding the PTT switch to transmit, press each corresponding
key to send the DTMF code:
[0] to [9] key: 0 to 9
[▲] key :
[▼] key :
[P1] key :
[P2] key :
[ MR] key:
[#VFO] key:
The transmission may continue for two seconds after releasing the PTT switch.
The registered DTMF code is automatically transmitted.
The DTMF code may be transmitted manually by pressing each numeric
key.
A
B
C
D
Û
#
Description
21