System board and components
15.3.3.4 Concluding steps
Ê If applicable, install the riser module 3 as described in section
riser module" on page
"Reassembling" on page 54
Ê
"Connecting the server to the mains" on page 60
Ê
"Enabling SVOM boot watchdog functionality" on page 89
Ê
"Switching on the server" on page 61
Ê
"Resuming BitLocker functionality" on page 95
Ê
15.3.3.5 Software configuration
In order to setup the ESXi configuration, the VMware ESXi Recovery Tools CD
is required. An ISO image of the CD is available from the Fujitsu service
partners portal at the following https address:
https://globalpartners.ts.fujitsu.com/com/service/ps/Servers/PRIMERGY/
Pages/default.aspx.
Ê Sign in and choose your PRIMERGY server.
Ê Select the Software & Tools Documentation category.
Ê Download the desired ESXi Recovery CD ISO image, listed under Tools.
Ê Unpack and burn the image to a CD.
Ê Ensure that no other USB storage device is connected to the server beside
the UFM.
Ê Insert the Recovery Tools CD into your CD / DVD drive and reboot the
server.
The server should now boot from the Recovery Tools CD.
Ê Follow the on-screen instructions to initiate the installation.
After the flash process is complete, you will be asked to reboot the system.
I
For the Japanese market, follow the instructions provided separately.
308
63.
Upgrade and Maintenance Manual
"Installing a
RX2530 M1