15.6
iRMC microSD card
I
The iRMC microSD card is necessary for using the Embedded Lifecycle
Management (eLCM) functionality of the iRMC. It requires a valid eLCM
license key, which is always purchased together with the iRMC microSD
card and activated through the iRMC web frontend.
For further information, please refer to the "ServerView embedded
Lifecycle Management (eLCM)" user guide.
15.6.1 Installing the iRMC microSD card
Upgrade and Repair Unit
(URU)
Tools: tool-less
15.6.1.1 Preliminary steps
"Shutting down the server" on page 48
Ê
"Disconnecting the server from the mains" on page 49
Ê
"Getting access to the component" on page 49
Ê
Ê If applicable, remove the riser module 3 as described in section
a riser module" on page
15.6.1.2 Installing the iRMC microSD card
Figure 238: iRMC microSD card
RX2530 M1
62.
Upgrade and Maintenance Manual
System board and components
Hardware: 5 minutes
"Removing
323