Fujitsu PRIMERGY RX2530 M1 Upgrade And Maintenance Manual page 197

Ê If applicable, reconfigure your network settings in the operation system
according to the original configuration of the replaced controller (expansion
card or onboard).
I
Configuration of network settings should be performed by the
customer. For further information, please refer to section
network settings recovery" on page
Ê If applicable, restore LAN teaming configurations, see
upgrading LAN controllers" on page
Ê Inform the customer about changed WWN and MAC addresses, see
"Looking up changed MAC / WWN addresses" on page
RX2530 M1
Upgrade and Maintenance Manual
Expansion cards and backup units
195.
99.
"Note on
"After replacing /
96.
197