Cmos Battery; Replacing The Cmos Battery - Fujitsu PRIMERGY RX2530 M1 Upgrade And Maintenance Manual

Hide thumbs Also See for PRIMERGY RX2530 M1:
Table of Contents

Advertisement

System board and components
SATA DOM
With the Innodisk Serial ATA Disk on Module (SATADOM) an internal SSD
is offered. This SSD can be configured as a boot device or data storage
device.
iRMC microSD card
The iRMC microSD card is necessary for using the embedded Lifecycle
Management (eLCM) functionality of the iRMC.
15.2

CMOS battery

15.2.1 Replacing the CMOS battery

Upgrade and Repair Unit
(URU)
Tools: tool-less; recommended: tooth pick
Safety notes
V
CAUTION!
The CMOS battery must be replaced with an identical battery or with
a battery type recommended by the manufacturer.
Keep lithium batteries away from children.
Do not throw batteries into the trash can. Lithium batteries must be
disposed of in accordance with local regulations concerning special
waste.
For further safety information, please refer to section "Environmental
protection" in the operating manual of your server.
Ensure to insert the CMOS battery with the positive pole facing
up!
298
Upgrade and Maintenance Manual
Hardware: 5 minutes
RX2530 M1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Primergy rx2530 m2

Table of Contents