Table of Contents
Advertisement
Figure 178: Applying the thermal paste
Ê Apply a small point-shaped amount of thermal paste (1.0 gram, see
description above) to the center of the processor surface as shown.
V
CAUTION!
Do not mix different types of thermal paste.
11.3.6 Installing the heat sink
I
Processors with 135 W and more need dedicated heat sinks (part
number V26898-B1000-V2, see figure 170).
Figure 179: Installing the heat sink
Ê Align the heat sink and fit it on the processor socket.
Ê Position the screws in the holes carefully, making sure they are upright.
Ê Fasten it in a crossover pattern with four screws according to the numbering
(torque 6.0 Nm, the description of this torque value doesn't apply to the
Japanese market).
RX2530 M1
Upgrade and Maintenance Manual
Processors
257
Advertisement
Table of Contents
