Concluding Steps; Removing An Fbu In A 3.5-Inch Hdd Chassis; Preliminary Steps - Fujitsu PRIMERGY RX2530 M1 Upgrade And Maintenance Manual

9.6.3.5

Concluding steps

"Reassembling" on page 54
Ê
"Connecting the server to the mains" on page 60
Ê
"Switching on the server" on page 61
Ê
9.6.4

Removing an FBU in a 3.5-inch HDD chassis

Upgrade and Repair Unit
(URU)
Tools: tool-less
V
CAUTION!
Dispose of used battery properly. Keep away from children.
●
Do not throw flash backup units into the trash can. Batteries must be
●
disposed of in accordance with local regulations concerning special
waste.
9.6.4.1

Preliminary steps

"Shutting down the server" on page 48
Ê
"Disconnecting the server from the mains" on page 49
Ê
"Getting access to the component" on page 49
Ê
Ê Remove the riser module 1 as described in section
on page 62.
Ê Remove the RAID controller in slot 1 as described in section
expansion card" on page
RX2530 M1
193.
Upgrade and Maintenance Manual
Expansion cards and backup units
Hardware: 15 minutes
"Handling riser modules"
"Removing an
219