Removing The Irmc Microsd Card; Preliminary Steps - Fujitsu PRIMERGY RX2530 M1 Upgrade And Maintenance Manual

15.6.2 Removing the iRMC microSD card

Upgrade and Repair Unit
(URU)
Tools: a pair of side-cutting pliers

15.6.2.1 Preliminary steps

"Shutting down the server" on page 48
Ê
"Disconnecting the server from the mains" on page 49
Ê
"Getting access to the component" on page 49
Ê
Ê If applicable, remove the riser module 3 as described in section
a riser module" on page

15.6.2.2 Removing the iRMC microSD card

Figure 240: Removing the iRMC microSD card
Ê To eject the iRMC microSD card, gently push it in and then let go (1).
Ê Pull the iRMC microSD card straight out of its slot (2).
RX2530 M1
62.
Upgrade and Maintenance Manual
System board and components
Hardware: 5 minutes
"Removing
325