Inch Hdd Configurations; Equipping The 3.5-Inch Hdd Bays - Fujitsu PRIMERGY RX2530 M1 Upgrade And Maintenance Manual

7.3

3.5-inch HDD configurations

7.3.1

Equipping the 3.5-inch HDD bays

– If only one HDD module is installed, the HDD module will be installed in the
left bay (seen from the front) and dummy modules must be installed in the
free bays.
– Installing different capacities, install the biggest capacity first.
– Installing different rotating speed, install the fastest rotating speed first.
Mounting order
Figure 71: Mounting order with up to four 3.5-inch HDDs
HDD naming scheme
Figure 72: Naming scheme with up to four 3.5-inch HDDs
I
The HDD numbering as listed in the ServerView RAID Manager differs
from the HDD mounting order:
Position Logical drive number ServerView RAID Manager display name
[1]
[2]
[3]
[4]
RX2530 M1
0 Vendor Product (0)
1 Vendor Product (1)
2 Vendor Product (2)
3 Vendor Product (3)
Upgrade and Maintenance Manual
Hard disk drives / solid state drives
145