Installing The New 4 X 2.5-Inch Hdd Backplane - Fujitsu PRIMERGY RX2530 M1 Upgrade And Maintenance Manual

7.2.8.3

Installing the new 4 x 2.5-inch HDD backplane

I
For configurations with up to four 2.5-inch HDDs/SSDs, please refer to:
section "Left side 4 x 2.5-inch HDD backplane (A3C40157852)" on
page 133.
For configurations with up to eight 2.5-inch HDDs/SSDs, please refer to:
section "Left side 4 x 2.5-inch HDD backplane (A3C40157852)" on
page 133 or
page 135.
Left side 4 x 2.5-inch HDD backplane (A3C40157852)
Figure 56: Installing the 4 x 2.5-inch HDD backplane
Ê Position the HDD backplane on the six hooks (see circles).
Ê Push the HDD backplane downward. Make sure that the lower cant of the
HDD backplane fits in the guides (A).
V
CAUTION!
Ensure that none of the cables are strained or damaged!
RX2530 M1
"Right side 4 x 2.5-inch HDD backplane (A3C40157828)" on
Upgrade and Maintenance Manual
Hard disk drives / solid state drives
133