Editing Camera Wifi Network Settings - Lorex LNC254 series User Manual

12 iPhone® App
2. Tap Camera Settings.
3. Tap Network then Wired Network.
4. Select DHCP (recommended) to allow the camera to automatically obtain an IP ad-
dress from the router or Static to use fixed IP address settings. If you select Static,
configure your IP Address, Subnet mask, Default gateway, DNS1, and DNS2.
5. Tap Update to save your settings.

12.5.9 Editing Camera WiFi Network Settings

Configure WiFi network settings for the camera.
To edit camera WiFi settings:
1. In Camera List, tap next to the camera you would like to edit.
2. Tap Camera Settings.
3. Tap Network then WiFi Network.
4. Slide WiFi to ON to enable WiFi on the camera and scan for available networks.
#LX400072; r.28402/28402; en-US
81