Table of Contents
Advertisement
11
L-View for Mac
4.
Playback: Click to open Playback mode. For details, see 11.7.1 Playing Back Vid-
eo from Your Mac's Hard Drive, page 57.
5.
Live View: Click to open Live View mode.
6.
Auto Search: Click to open Auto Search mode. For details, see 11.4.1 Adding
Cameras to Camera List, page 55.
7.
All Camera Action: Click to perform an action on all cameras.
8. Recording Controls:
•
Connect/Disconnect: Click to disconnect from the camera. Click again when
not viewing live video to reconnect.
•
Record: Click to start/stop manual recording. For details, see 11.7 Recording
Video to Your Mac's Hard Drive, page 57.
•
Snapshot: Click to take a snapshot from the camera. To view snapshots, click
and select Snapshot folder.
•
Microphone On: Click to enable audio from the selected camera. Adjust vol-
ume with the Volume Slider.
•
Folder: Click to open the recording folder or snapshot folder for this camera.
9. Display Area: Shows video from your camera.
• Double-click to view the camera in full-screen; double-click again to exit full-screen.
10. Split-screen Controls:
•
: Click to open single camera view.
•
: Click to open 4-camera view.
•
: Click to open 6-camera view.
•
: Click to open the current display in full-screen. Press ESC to exit full-screen.
11.
Volume Slider: Use to adjust the volume of the selected channel.
Click
to mute/unmute audio.
#LX400072; r.28402/28402; en-US
54
Advertisement
Table of Contents
