Control Tab (Configure Status Led's And Motion Detection Sensitivity) - Lorex LNC254 series User Manual

11 L-View for Mac
10. Check Enabled beside Time display on video to turn on video time stamps or un-
check it to disable video time stamps.
11. Check Enabled beside Video flip, to flip the camera image vertically and horizontally,
or uncheck it for normal orientation.

11.9.3 Control Tab (Configure Status LED's and Motion Detection Sensitivity)

The Control tab allows you to configure the camera status LED's to make the camera hard-
er to spot at night. It also allows you to configure the motion detection sensitivity when us-
ing video motion detection.
To configure the camera status LED's:
1. Click beside the camera you want to edit in Camera List and click Video setting.
Then, select the Control tab.
2. Under Status LED Control, select one of the following:
• Normal: LED's will function as normal. For details on LED functions, see 2 Camera
Overview, page 2 or , page .
• Always turn off: LED's are turned off at all times.
• Turn off after connected: LED's turn on when the camera is powered on and turn
off once a network connection is made.
3. Click Update to save changes. Enter the camera admin user name (default: admin)
and password (default: left blank) and click OK. Click OK to exit the settings window.
NOTE
The camera may reboot after settings are changed. Wait about 30 seconds and then double-click the
camera in Camera List or Auto Search to reconnect to the camera.
To configure motion detection sensitivity:
1. Right-click the camera in Camera List and click Video settings. Then, select the Con-
trol tab.
2. Under Motion Detection Sensitivity, select the motion detection sensitivity between
1 (High) and 10 (Low). If Motion Detection Sensitivity is set to 1, motion detection will
be triggered if a moving object is larger than 1% of the video area. If it is set to 10, a
moving object must be larger than 10% of the video area to trigger motion detection.
#LX400072; r.28402/28402; en-US
64