Admin; Admin Login - Lorex LNC254 series User Manual

Table of Contents

Configuring Camera Settings Using a Browser

3. Click Update Schedule.

15.5 Admin

Configure the camera date and time, passwords, and LED's. Restart the camera. Perform

system upgrades.

Configure the admin user name and password for the camera. The admin user name and

password are used to login to Web Configure or change settings using apps. Configure

the web access port.

To configure the admin user name and password used to login to Web Configure:

1. Under Username, enter the desired admin user name for the camera. The default is

admin.

2. Under Password, enter the desired admin password for the camera. By default, the

password field is left blank when logging in. Repeat the password under Password

confirm.

3. Click Save & Apply to apply the settings to the camera. Restart the camera by discon-

necting and reconnecting the power adapter or pressing the Reboot button (see 15.5.5

Reboot, page 140).

To configure the Web access port:

For added security, you may change the camera's web access port. Please note that if you

change the web access port, you must enter the camera's IP address, a colon (:), and

the camera's web access port when connecting to the camera's IP address on the local

network (e.g. 192.168.0.101:80).

1. Under Web access port, enter the desired web access port. It must not be used by

any other device on your network. Note that L-View will automatically update the web

access port when connecting to Web Configure on the local network.

#LX400072; r.28402/28402; en-US

136

Table of Contents