Editing Camera Wired Network Settings; Editing Camera Wifi Network Settings - Lorex LNC254 series User Manual

14 Android™ App
2. Tap Alarm Notification.
3. Under Motion, tap to select ON to enable Push Alarm Notifications when motion is de-
tected using video motion detection or OFF to disable.
4. Under Sound, tap to select ON to enable Push Alarm Notifications when sound is de-
tected by the camera or OFF to disable. Under Sound Sensitivity, select a sensitivity
for Sound Push Alarm Notifications between 1 (lowest) and 10 (highest).
5. Tap Update to save your settings.

14.4.8 Editing Camera Wired Network Settings

Configure the camera IP address when connected using Ethernet. Select DHCP or Fixed
IP.
To edit camera wired network settings:
1. In Camera List, tap next to the camera you would like to edit.
2. Tap Camera Settings.
3. Tap Network then Wired Network.
4. Select DHCP (recommended) to allow the camera to automatically obtain an IP ad-
dress from the router or Static to use fixed IP address settings. If you select Static,
configure your IP Address, Subnet mask, Default gateway, DNS1, and DNS2.
5. Tap Update to save your settings.

14.4.9 Editing Camera WiFi Network Settings

Configure WiFi network settings for the camera.
To edit camera WiFi settings:
1. In Camera List, tap next to the camera you would like to edit.
2. Tap Camera Settings.
#LX400072; r.28402/28402; en-US
118