Lorex LNC254 series User Manual page 71

11 L-View for Mac
To configure general video settings:
1. Click beside the camera you would like to edit in Camera List and click Video set-
ting. Then, select the Video tab.
2. Click Update to save changes. Enter the camera admin user name (default: admin)
and password (default: left blank) and click OK. Click OK to exit the settings window.
NOTE
The camera may reboot after settings are changed. Wait about 30 seconds and then double-click the
camera in Camera List or Auto Search to reconnect to the camera.
3. Click OK to confirm settings. Click Update to save changes to the camera.
4. Under Video Color, select Colored or Black & White.
5. Under Brightness, select the brightness of the image between 10 (highest) and
1 (lowest).
6. Under Sharpness, select the sharpness of the image between 10 (highest) and 1
(lowest).
7. Under Low Light Sensitivity, set the camera's sensitivity in low light environments be-
tween Very High (highest), High, and Normal (lowest).
8. Under Place, select Outdoor if the area with the camera is brightly lit. Select Indoor if
you notice strip lines in the image or if the picture is too dark on the Outdoor video set-
ting. Select Indoor + Sunlight if the picture is too bright on the Indoor setting.
• If you select Indoor or Indoor + Sunlight, select 60Hz or 50Hz to adjust the cam-
era for the frequency of your indoor lighting.
9. Under Preference, select your quality preference when bandwidth increases or
decreases:
• Select Video motion to have the camera maintain the frame rate and reduce image
quality when bandwidth is insufficient.
• Select Image quality to have the camera maintain image quality and reduce frame
rate when bandwidth is insufficient.
• Select Better quality to have the camera maintain frame rate and increase quality
when bandwidth is sufficient.
• Select Best quality to have the camera maintain the frame rate and increase qual-
ity to the maximum speed of the connection.
#LX400072; r.28402/28402; en-US
63