Table of Contents
Advertisement
iPhone App
4. Select DHCP (recommended) to allow the camera to automatically obtain an IP
address from the router or Static to use fixed IP address settings. If you select Static,
configure your IP Address, Subnet mask, Default gateway, DNS1, and DNS2.
5. Tap Update to save your settings.
6.4.9 EDITING CAMERA WIFI NETWORK SETTINGS
Configure WiFi network settings for the camera. To setup the camera with a WiFi
network, see "iPhone WiFi Setup" on page 23.
To edit camera WiFi settings:
1. In Camera List, tap
2. Tap Camera Settings.
3. Tap Network then WiFi Network.
4. Slide WiFi to ON to enable WiFi on the camera and scan for available networks.
5. Tap a WiFi network and enter the password to connect.
• To connect to a hidden WiFi network, tap Other. Enter the SSID and select the security
type and tap Add. Tap the network name from the list and enter the password.
6. Wait for the update to complete.
7. Remove the Ethernet cable from the camera. It will connect to the WiFi network.
When it is connected, the blue Network LED will be on or flashing.
8. Press Camera Settings then Camera List to exit the edit camera screen.
96
next to the camera you would like to edit.
Slide Wi-Fi to ON
Tap your WiFi network
Tap Other to add a hidden WiFi
network
Advertisement
Table of Contents
