Table of Contents
Advertisement
11
L-View for Mac
• If you are adding a camera over the Internet, see , page .
• Click
to configure the camera settings using a browser. See 15 Configuring Cam-
era Settings Using a Browser, page 125.
11.4.2 Deleting Cameras from Camera List
• Click
in Camera List, then click
Click OK to confirm.
11.5 Patrol Settings Interface
Open your camera's patrol settings by clicking Patrol from the L-View home screen.
1. Checkbox: Enable/disable the patrol point as part of your patrol route.
2. Go to: Move your camera to the patrol point.
3. Set: Save your camera's current position as a patrol point.
#LX400072; r.28402/28402; en-US
beside the camera you would like to delete.
56
Advertisement
Table of Contents
