Wall Or Ceiling Mounting; Installation Tips And Warnings; Installation - Lorex LNC254 series User Manual

Table of Contents

Wall or Ceiling Mounting

• Camera is rated for indoor use only. Do not install in wet or humid areas.

• MAKE SURE to run all power adapter and network cables at least 3ft / 1m away from

cribs, bassinets, play yards, and other safe sleep environments for infants.

• Do not point the camera out of a window. The camera will not be able to see at night-

time due to reflection from the Infrared LED.

• Temporarily connect the camera and test it before permanent installation.

• If using the camera with a wireless network, set up the camera's wireless connection

before permanent installation.

• Make sure that power adapter cable and Ethernet cable (if connecting the camera us-

ing Ethernet) are long enough to reach the installation location.

1. Use the camera mounting bracket to mark holes for the mounting screws. If you are in-

stalling the camera in the ceiling, the screw holes should face the same direction that

you would like the camera to point.

2. Drill holes for the mounting screws. If installing in drywall, it is recommended to use the

included drywall anchors.

3. Attach the mounting bracket to the wall or ceiling using the included mounting screws.

Adjust the angle as necessary. See below for suggested mounting configurations.

Wall Mount

4. Fit the camera's bracket slots onto the mount, and twist to secure the camera.

5. Connect the power adapter cable and Ethernet cable (if connecting the camera using

Ethernet) to the camera.

#LX400072; r.28402/28402; en-US

Ceiling Mount

Table of Contents