Editing Camera Wired Network Settings - Lorex LNC254 series User Manual

12 iPhone® App
3. Select one of the following:
• Auto: Camera will automatically switch between day mode or night mode, based on
the amount of light in the room.
• Schedule: Camera will switch between day mode and night mode at a scheduled
times each day. If using this option, tap under Schedule time of night mode, use
the sliders to set the Start time (when night mode begins each day) and End time
(when night mode ends each day), then tap OK.
• Manual: Manually select day mode or night mode. If using this option, select Day
for day mode or Night for night mode.
4. Tap Update to save your changes.

12.5.8 Editing Camera Wired Network Settings

Configure the camera IP address when connected using Ethernet. Select DHCP or Fixed
IP.
To edit camera wired network settings:
1. In Camera List, tap next to the camera you would like to edit.
#LX400072; r.28402/28402; en-US
80