Enabling Speaker Alarms - Lorex LNC254 series User Manual

13 iPad® App
6. Check the following trigger options for email alarms:
• Motion: Use Video motion detection to trigger email alarms. Video motion detection
looks for movement in the image to determine if there is motion. This means that
there may be false alarms caused by changes in lighting, trees moving in the wind,
etc.
• Schedule: Send email alarms based on the settings configured in the Scheduling
menu.
7. Under Send Email, select ON to enable email notifications.
8. Enter up to 3 email addresses under Recipient that will receive email alarms.
9. Tap Update to save your changes.
NOTE
If you want to use a custom SMTP server to send Email messages, click SMTP Settings, enter your
SMTP server information, and tap OK.

13.4.11 Enabling Speaker Alarms

Configure the siren. The siren can be set up to go off when the camera detects motion.
This is helpful if you want to scare off intruders.
To configure speaker alarms:
1. In Camera List, tap
2. Tap Camera Settings.
3. Tap Schedule then Speaker Alarm.
4. Under Speaker Alarm Trigger, check the triggers that will cause speaker alarms:
• Motion: Use Video motion detection to trigger audio alarms. Video motion detection
looks for movement in the image to determine if there is motion. This means that
there may be false alarms caused by changes in lighting, trees moving in the wind,
etc.
• Schedule: Create audio alarms based on the settings set in the Scheduling menu.
• Disable: Disable speaker alarms.
5. Under Alarm Loop Times, select the number of times you would like the speaker
alarm to repeat when alarms occur. Tap Done.
#LX400072; r.28402/28402; en-US
next to the camera you would like to edit.
102