Configuring Night Mode Settings; Editing Camera Wired Network Settings - Lorex LNC254 series User Manual

Table of Contents

iPad® App

13.4.7 Configuring Night Mode Settings

Configure when the camera uses day or night mode. When day mode is on, the camera

sees in color. When night mode is on, the camera sees in black and white, and the Infrared

LED turns on to enable night vision.

To configure Day/Night mode:

1. In Camera List, tap

2. Tap Video Settings. Then tap Night Mode Control.

3. Select one of the following:

• Auto: Camera will automatically switch between day mode or night mode, based on

the amount of light in the room.

• Schedule: Camera will switch between day mode and night mode at scheduled

times each day. If using this option, tap under Schedule time of night mode, use

the sliders to set the Start time (when night mode begins each day) and End time

(when night mode ends each day), then tap Done.

• Manual: Manually select day mode or night mode. If using this option, select Day

for day mode or Night for night mode.

4. Tap Update to save your changes.

Configure the camera IP address when connected using Ethernet. Select DHCP or Fixed

IP.

To edit camera wired network settings:

1. In Camera List, tap

2. Tap Camera Settings.

#LX400072; r.28402/28402; en-US

next to the camera you would like to edit.

Table of Contents