6
Connecting to Your Camera on iPad®
7. Press the WPS button on the camera. The LEDs will start flashing.
8. Place your device about 1ft (30cm) away from the camera.
The camera scans the QR code on your iPad® to connect to the WiFi network. When
the connection is successful, the camera beeps, and the "Camera Found" message
below appears on your device after a few seconds.
9. Enter a name for your camera and press OK.
10. Tap the camera to connect.
11. If this is the first time connecting to the camera, you will be prompted to create your
own password. Tap OK.
#LX400072; r.28402/28402; en-US
16