Led Control; Date/Time - Lorex LNC254 series User Manual

15 Configuring Camera Settings Using a Browser
2. Click Save & Apply. Restart the camera by disconnecting and reconnecting the power
adapter or pressing the Reboot button (see 15.5.5 Reboot, page 140).
NOTE
Your computer must be on the same network as the camera to use Web Configure. You may change cam-
era settings over the Internet using the iPhone®, iPad®, or Android™ apps.

15.5.2 LED Control

Configure the behavior of the camera status LED's. This is useful if you want the camera
to be harder to spot at night.
To configure the LED's:
1. Select one of the following:
• Normal LED display: LED's will function as normal. For details on LED functions,
see 2 Camera Overview, page 2 or , page .
• Turn off LED display always: LED's are turned off at all times.
• Turn off LED display after network connected: LED's turn on when the camera
is powered on and turn off once a network connection is made.
2. Click Save & Apply to apply settings to the camera.

15.5.3 Date/Time

Configure the camera date and time. The camera syncs with an Internet NTP time server
to automatically provide the correct time, once you have configured your time zone and
daylight savings time settings.
#LX400072; r.28402/28402; en-US
137