Editing Motion/ Sound Notification Settings (Push Notifications) - Lorex LNC254 series User Manual

13 iPad® App

13.4.3 Editing Motion/ Sound Notification Settings (Push Notifications)

Push Alarm Notifications can be set up to create a notification straight to your iPad® when
motion or sound is detected by the camera. Push Alarm Notifications go directly to the no-
tifications area on your device.
To enable Push Alarm Notifications:
1. In Camera List, tap
2. Tap Alarm notification.
NOTE
For certain menus, you will need to enter the camera admin user name and password before you
may change settings. By default, the admin user name is admin and the password is left blank.
3. Under Motion, select ON to enable Push Alarm Notifications when motion is detected
using video motion detection or OFF to disable.
4. Under Sound, select ON to enable Push Alarm Notifications when sound is detected
by the camera or OFF to disable. Under Sound Sensitivity, select a sensitivity for
Sound Push Alarm Notifications between 1 (lowest) and 10 (highest).
5. Tap Update to save your settings.
#LX400072; r.28402/28402; en-US
next to the camera.
95