Table of Contents
Advertisement
10
L-View for PC
3. Stop patrol: End the camera's patrol route.
4. Patrol: Change your camera's patrol settings.
5. Speed: The rate your camera to moves between patrol points, 1 (slowest) to 3
(fastest).
6. Tilt: Click to start moving the camera up and down automatically.
7. Pan: Click to start moving the camera left and right automatically.
8. Show/hide: Click to show or hide PTZ controls.
10.2.2 Display Sub-Menu
The Display sub-menu opens when you right-click on a camera's display area. It contains
additional camera controls.
The Display sub-menu contains the following controls:
• Full window: Open the camera in single camera view.
• Auto reconnect: L-View will attempt to reconnect to the camera if it becomes
disconnected.
• Stop: Disconnect from the camera.
• Pause: Pause the video. Click again to resume the video.
• Motion recording: Activate/deactivate motion recording.
• Properties: Click to view video properties.
Video Properties
10.2.3 All Camera Action
Press
to open the All Camera Action menu.
#LX400072; r.28402/28402; en-US
36
Advertisement
Table of Contents
