Mac Wifi Setup - Lorex LNC254 series User Manual

9 Connecting to Your Camera on Mac
4. If this is the first time connecting to the camera, you are prompted to change your pass-
word. Click OK.
5. Enter a new password and click OK. L-View connects to your camera and streams live
video. For more details on using L-View for Mac, see 11 L-View for Mac, page 53.
NOTE
To connect to multiple cameras, click to select a display area. The area becomes highlighted. Then, dou-
ble-click the camera to open it in the selected area.

9.2 Mac WiFi Setup

The camera must be connected to your router using an Ethernet cable before you can set
it up to use WiFi.
1. Install L-View on a Mac in your local network (must be connected to the same router
as the camera) and connect to the camera.
2. Click to search for cameras on the same network.
3. Click to access Web configure settings.
#LX400072; r.28402/28402; en-US
30